Posted on Leave a comment

From Globalization To A Planetary Mindset

It’s time for new cooperative platforms that address irreducible interdependence.

 

Globalization as we have known it is over. Kaput. As John Gray summarily puts it in his contribution to Noema, “forget it.” For the British philosopher, we are returning to the pluralism that existed before the post-Cold War neoliberal expansion and even the recent centuries of Western hegemony. This is the fragmentation that Chinese thinker Yuk Hui also talks about in Noema. For him, that means any new order will arise at multiple starting points, or bifurcations, that depart from the course we were on.

 

There will be many possible permutations, from Cold War and economic decoupling between the two great powers, protectionist trade policies and immigration curbs. We will see a patchwork of industrial policies aimed at strengthening national resilience instead of global integration. So-called “robust” supply chains that are partly global and partly domestic to build in redundancy as a hedge against political or natural disruptions are already appearing. While the populist revolt dealt the death blow to globalization, alternative political dispositions waiting in the wings have also so far shown little interest in resuscitating it.

 

What remains, and is irreducible, is the planetary. Obviously, the global ecosystem, including climate and pandemics that cross borders, qualify as planetary. The challenges here are recognized as common and convergent for all.

 

Thus, reconciling the centrifugal pull of ingathering with the centripetal imperative of planetary cooperation is the so-called “primary contradiction” going forward.

 

This contradiction will play out across a global communications web that has spun a synchronized planetary consciousness in which all are aware of what everyone else is doing, or not doing, in more or less real time. Inexorably, a kind of global mind, or “noosphere” as Teilhard de Chardin envisioned it, is emerging. But it is today as much a terrain of contestation rooted in divergent political and cultural tempers, including an ever more differentiating splinternet, as a space of common ground.  

 

The “noopolitik” of the coming era could not be more different than the realpolitik of the last century. Rather than solid nation-states in which elites calculate balances of power, noopolitik is a transparent endeavor open to all manner of connected players in a now gaseous global realm in which nations are attempting to reclaim sovereignty even as the solidity they once assumed diminishes with every passing day.

 

The ultimate project of a planetary approach, therefore, is to forge a shared narrative for the noosphere. This doesn’t imply some one-size-fits-all Leviathan-like order that sets solutions to whatever ails the world, but a prevalent normative awareness that a cooperative approach is the only way to make irreducible interdependence work for each of us instead of against all of us.

 

That shared consciousness, or “noorative,” will only take hold in the first instance if its foundation rests not on wooly abstractions but on the existential imperative of cooperation in such clear and present realities as climate and pandemics. In effect, this noorative would combine the Chinese strategist Zheng Bijian’s idea of “building on a convergence of interests to establish a community of interests” with the German philosopher Peter Sloterdijk’s notion of “planetary co-immunism,” as he explains in an interview with Noema.

 

This new order of cooperation, and the evolved consciousness that arises out of its concrete actions, can only be built one brick at a time through new planetary platforms. A “partnership of rivals” among nation-states and the “civilization-states” that are in conflict in some realms, but nonetheless have cross interests in others, is one such way. It can also be built through “networks of the willing” among both civil society and states so disposed. In other words, alternative, parallel practices and institutions will have to be built on another foundation than a U.N.-style “trade union for nations-states” in order to ultimately go beyond the lessening but still weighty pull of their inertia.

 

One example of this approach was embodied in the Berggruen Institute’s 21stCentury Council presentation to former Mexican President Felipe Calderón when he hosted the G20 in 2012 — the first time that supranational body tackled climate change. We proposed that while G20 summitry could set broad goals, it lacked the legitimacy to implement them across different jurisdictions. To that end we recommended that “a web of national and subnational networks should be fostered to provide global public goods, such as low-carbon growth, from below through ‘coalitions of the willing’ working together to build up a threshold of global change.”

 

Only once the trust- and legitimacy-building experience of new platforms that address climate and pandemics gain traction can that cooperative spirit meaningfully address other imminent planetary challenges — bioengineering, AI and the creation of inorganic life.

 

The time has arrived to stop regretting the lost illusions of globalization and start thinking of how to construct a new order grounded in the undeniable realities of interdependence.


Jonathan Zawada for Noema Magazine BY NATHAN GARDELS AUGUST 7, 2020 

 
Posted on Leave a comment

The New Common Agricultural Policy Has Been Adopted And the Maximum THC Level on the Field Has Been Restored to 0.3%

 

One year later, and after long discussions aiming at working out compromises between the three EU institutions, the final proposal of the Common Agricultural Policy (CAP) was adopted today by the council, following the final vote at the European Parliament on November 24.

The new CAP, that will enter into force on January 1st, 2023, recognises the possibility for farmers to receive Direct Payments for hemp varieties registered in the EU Catalogue that have a maximum level of THC of 0,3 %.

This change entails a potential enlargement of the number of hemp varieties accepted under the EU Catalogue. As a reminder, this level only applies if farmers want to receive direct payments, meaning that in Europe it is possible to plant hemp with THC level on the field over 0,3 %, provided it is authorised by national regulations (e.g., 0,6 % in Italy; 1 % in Czech Republic).

“I have been fighting for this moment for over a decade. My special thanks go to our amazing team in Brussels, who have made this possible.” Says Daniel Kruse, pioneer of the hemp industry and President of the European Industrial Hemp Association (EIHA).

“This is a great day for the hemp sector and another step towards a greener future for Europe. However, if compared to other countries worldwide, 0, 3 % is still a low limit; for instance, Switzerland, in the heart of Europe, has a higher number, and other EU countries already work with higher limits as well.

“Scientific studies and many years of experience prove that higher limits pose absolutely no safety risk for consumers. The EU lays the foundation for a growing, green and sustainable industrial hemp sector across our Union and it has the chance to achieve a level playing field again in global competition when it comes to the industrial hemp sector.”

“I am proud of what has been achieved today. We worked hard to ensure that hemp had the recognition it deserves in the Common Agricultural Policy. I would say that this small step reflects that EU legislators are closer to fully acknowledging and recognising the existence of a legitimate European hemp sector.” Says Lorenza Romanese, EIHA Managing Director.

“However, as I have said other times, this is not it. We need to keep working together, as there are
still other areas where hemp deserves to be better regulated, but we are on the right track.”

Posted on Leave a comment

‘Hemp surging as an environmental alternative to other fibers’


Lawrence Serbin, Hemp Traders

INTERVIEW: A 31-year veteran of the hemp industry, Lawrence Serbin is president of California-based Hemp Traders, which he founded in 1994. He started Cannagrove, a producer of engineered hemp “wood” particleboard in 2018 after having researched such material since 2005. Serbin is past national director of the Business Alliance for Commerce in Hemp and past president and director at the national Hemp Industries Association. He served as chair of the California Hemp Advisory Board for the California Department of Food and Agriculture from 2017–2020. He is currently working to bring decortication, processing, and spinning facilities online to support the U.S. hemp construction and textile sectors.

HempToday: You have a wide, wide assortment of hemp products at Hemp Traders. What kind of products are trending now?

Lawrence Serbin: We have always sold hemp textiles, but at this moment, there is definitely a surge in the interest to use hemp as an environmental alternative to other fibers in textiles.

HT: You’ve mentioned that Hemp Traders now imports yarns from China since the machines don’t exist in the U.S. Won’t yarn from China always be less expensive?

LS: Perhaps. China has lower production costs due to a lower standard of living, so there is going to be a cost-benefit to working with China. And it is fairly inexpensive and environmental to ship things to and from China by boat. But we do have an opportunity to grow hemp in the United States.

HT: How is your work going with respect to bringing farmers and processors online to support the development of a U.S. supply chain for textiles and building materials? How do you see the investment picture shaping up there?

LS: Very well. We are growing our first farm size test crop in California’s Central Valley. The information we are getting this year will allow us to grow on a commercial scale in 2022. We have also set up a fiber processing facility near to where the hemp is grown.

HT: What are the economics of the hemp particle board you developed at Cannagrove? Is it even fair to ask, at this point, for price comparison with conventional wood-chip particle board?

LS: The first boards we made were more expensive than regular particleboard mainly due to having to ship the raw materials around the country to the factory that could produce it. The shipping costs were half of the cost of making the board. But when the hemp is made at a facility that is near to where the hemp is grown, it becomes much less expensive. And now with the higher costs of regular wood particleboard, hemp is going to be a less expensive alternative.

HT: What’s happening with hemp building materials in general? Do you see any significant movement in that market?

LS: One main problem with the hemp building market has been a lack of raw materials. Mostly we have had to import them. As we begin to grow more hemp in the United States for fiber, there will be much more material available at a lower cost. This will be what kick starts the hemp building industry.

HT: How do you see the arc of production for such biocomposite products going forward the next five years?

LS: I think we will see 2021 and 2022 begin to establish the markets for hemp fiber products and grain. After that, there will be a huge increase in demand with farmers increasing acres devoted to fiber and grain.

HT: Some parts of California don’t seem very friendly to hemp. What’s up with that in your state?

LS: There are two things going on. Some areas of the state have a history of marijuana production. Those areas are concerned that high CBD hemp flower varieties might cross-pollinate with their crop and lower the value. In other areas where people have grown for CBD, a pungent odor of cannabis around harvest time has had people complain. Overall there is overregulation of the hemp industry, especially when it comes to fiber crops, which don’t even produce a flower.

HT: When you started in hemp three decades ago, did you think the industry would develop faster than it has?

LS: In the beginning in the early 1990’s I thought we would first see industrial hemp legalized, followed by medical cannabis and then recreational cannabis. I thought this would all happen by the end of the decade. In reality we first saw medical marijuana legalized, followed by recreational, and then industrial. And it took over 25 years.

HT: Thirty-one years is a long time in hemp. You must have one or two heroes.

LS: There are a few people I admire. Canada legalized industrial hemp in the late 1990’s and two companies emerged to fill the demand for hemp foods. Hemp Oil Canada founded by Shawn Crew and Manitoba Harvest founded by Mike Fata. Those are good examples of what a professional hemp company should look like.

Posted on Leave a comment

Absorbing characteristics

Weigth in CO2

Did you know that every single tonne of hemp grown, absorbs approximately 1.6 tonnes of CO2 from the atmosphere?
"We harvested around 750 tonnes of hemp this year, offsetting around 1,200 tonnes of CO2. That's enough to cover 160 average households for a full year - or one household for 160 years! 🌱" - Harrison Spinks
Posted on Leave a comment

Biofiber Hempcrete Blocks for zero carbon Trent Forensics Facility

Feb 11, 2021 

Trent University has a goal to store more carbon in the building materials of their new Forensics Facility than was emitted in making the materials. In order to offset the inevitable emissions from harvesting and manufacturing materials it is necessary to use biogenic (plant-based) materials that store carbon in the material.

Hemp is the plant-based material of choice for this project. We chose two hemp-based materials for the Trent Forensics facility: Just Biofiber hemp blocks to be the load-bearing walls of the building and NatureFibres hemp batts to insulate the stud wall cavities. This post will focus on the Just Biofiber blocks.

Just Biofiber hempcrete blocks are a new product being manufactured in Alberta, Canada. The blocks consist of a plastic frame around which hempcrete is cast and cured. The blocks look and act much like large Lego blocks, with the eight posts on the top of a block fitting into holes in the bottom of the block above.

The Just Biofiber blocks provide enough load-bearing capacity in the plastic frames to be the structural wall for the building, and offer R-21 of thermal performance. A mortar made from lime and chopped flax is used to seal between each block and glue is applied to the plastic posts to attach the blocks together.

We were excited to work with Just Biofiber hempcrete blocks, having watched the company go through initial development and testing very closely. In practice, we found the system had a few key flaws. Firstly, the glue that is required is smelly, toxic and messy. Our crew truly despised working with the glue. Secondly, the Lego-like fit between the blocks made for a fussy installation as the tolerance is around 1/8-inch and if the foundation isn’t perfectly level a lot of work is required to ensure the blocks actually fit. A lot of dry-stacking is required to ensure a fit, and shimming was constant throughout the process. Finally, there are threaded rods required within the blocks and these were fussy and slow to install. The relatively low thermal performance of the blocks required us to add a frame wall with more insulation to meet our R-40 target.

We loved working with a hempcrete product that didn’t require site mixing or a lengthy drying process, but feel that the Just Biofiber hempcrete blocks need more development before they are a cost-competitive and easy-to-install system. We hope to see Just Biofiber continue to innovate and improve their system and look forward to a chance to work with the product again in an updated form.

Posted on Leave a comment

Hempcrete Submitted for Certification in US Building Codes

The 6,000 sq. ft Cape Cod Hemp House, built in 2021-2022, is the largest hempcrete-insulated structure built in the US last year. Photo courtesy of Mpactful Ventures

The professional association representing the US hemp building industry moved forward to certify hemp and lime (hempcrete) insulation in US building codes this month.

Hempcrete was submitted as an appendix in the International Residential Codes on Jan. 10 by the US Hemp Building Foundation, the non-profit arm of the US Hemp Building Association.

The idea is to give U.S. building permitting departments a familiarity with the material, which is new to the United States after hemp was legalized under the 2018 Farm Bill. 

“These documents will show a pathway for using hempcrete as a building material,” USHBA President Jacob Waddell told HempBuildMag. “The goal is to allow you to build with hempcrete without needing an alternative material variance,” he added. 

Subscribe for HempBuild Magazine’s free newsletter

An international committee of hemp building experts and advocates prepared the paperwork to submit to the International Code Council. IRC code experts will evaluate the paperwork in March and again in September to enshrine hemp + lime as an approved natural building material. 

Eventually, inclusion in the IRC should “allow for hempcrete to be accessible to the standard person to construct with it,” Waddell said. 

Hempcrete, a non-structural insulation made of hemp hurd (shiv) and lime binder, provides a superior insulation product when installed up to 1 foot thick in wall assemblies. The material is vapor-permeable, thermally regulating, fire resistant and and repels mold and pests. Hempcrete insulation is carbon negative due to the large amounts of carbon sequestered by the hemp plant via photosynthesis while growing.

Used widely in Europe

The US building industry has some catching up to do when it comes to the international use of hemp in building materials.

Hempcrete has been employed as a carbon-negative insulation for 30 years in Europe, as an insulating construction material for large department stores in the United Kingdom and multistory residential buildings and public facilities in France.

Thirty-unit hempcrete apartment building in Paris. Photo courtesy of North by Northwest Architectes.

Patchwork of US building departments

Right now in the United States, builders, engineers and architects who want to use hempcrete must gain approval project-by-project in the absence of an overarching national code to point to, said Texas-based developer Ray Kaderli, of the Hemp Build Network.

Kaderli’s company was just permitted by the city of San Antonio to build a hempcrete-insulated three-bedroom/two-bath 1,300 sq. ft. home. 

Kaderli, a member of USHBA, praised the organization for moving forward with certification for hempcrete. 

“With a new industry there are many things to do,” Kaderli said in an email. “This was one of the most important first steps. I’m grateful [USHBA] had the insight and discipline to focus in this direction.”

The certification process also leads the way to apply to certify hempcrete in the International Commercial Building Codes for commercial buildings in 2024, when the next application process begins, USHBA president Waddell said. 

The material still needs to pass various ASTM fire tests as well as tests for structural bracing, Waddell said, for which the foundation will continue to raise funds. 

Straw bale builders paved the way

USHBA hired engineering and natural building consultants, including two straw bale construction pioneers who helped get straw bale construction certified in the US residential building codes in the early 2000s. 

Right now, the application submitted to the IRC only includes one-story structures to be insulated with hempcrete wall assemblies without extra engineering. This is a start that will be built upon to expand hempcrete’s role in the building codes, as more data and research is submitted and approved, Waddell said. 

“Submitting to the IRC is just the first step in a very long process to get hempcrete where we’re able to use it more readily,” Waddell said. 

The USHBA has about 200 active members and raised about $50,000 through its foundation for certification expenses and a series of other projects, including workforce development and creating educational materials, Waddell said.

The organization will host a members-only online event on Saturday, Jan. 30, where more information about the IRC certification will be shared.

Click here to go to our FREE online community.

6,000-sq. ft hemp home befuddled permit officials 

The Massachusetts building permit official who approved one of last year’s largest hempcrete projects built on US soil last year, was initially confused at the rough inspection of the Cape Cod Hemp House, said Mary Dempsey, of Mpactful Ventures. 

“The building inspector took one look and said, ‘Wait a minute where’s your plywood?’ Then he muttered, ‘I gotta go study these plans better,’” she told HempBuildMag.

Even though the Cape Cod Hemp House relied on engineering approval and didn’t have difficulty getting a permit, Dempsey said including hempcrete in the IRC codes will help local building permitting authorities better understand how it works and what it can and cannot do. Mpactful Ventures and Dempsey helped steer the USHBA study group to gather the paperwork and research together to submit to the IRC. 

“People from all over the world were helping by reading this [document] to hopefully move an entire industry forward,” Dempsey said. “I’m really proud to have been part of it.”

Jean Lotus is editor and publisher of HempBuild Magazine.

Posted on Leave a comment

Extracting High-value Products from Hemp Waste



Hemp (Cannabis sativa) is cultivated for its fiber (bast fiber) and its edible seeds as well as some medicinal products. When bast fibers are separated from the hemp stem, what’s left is called hemp hurds. These woody residues are the least valuable part of the hemp stem and are treated as a by-product of fiber production, even though they represent the largest fraction of the hemp plant.

Extracting High-value Products from Hemp Waste

Hemp (Cannabis sativa) is cultivated for its fiber (bast fiber) and its edible seeds as well as some medicinal products [1]. When bast fibers are separated from the hemp stem, what’s left is called hemp hurds. These woody residues are the least valuable part of the hemp stem and are treated as a by-product of fiber production, even though they represent the largest fraction of the hemp plant. Hemp hurds can be used in a range of applications such as animal bedding, construction materials, and garden mulch [2], but they are still generally considered as waste.

Slow Pyrolysis
However, thermochemical processing of hemp hurds can produce some high-value products. One particular thermochemical process called slow pyrolysis can be used to convert hemp hurds into biochar, liquids (distillates), and gases [3]. These are produced in approximately equal amounts, although the process conditions can be adjusted to maximize the yield of a particular fraction.

Slow pyrolysis is usually used to convert biomass into biochar, a type of carbon-rich charcoal that is used as a soil improver or to store carbon. Liquid distillates are also produced, but they are considered a by-product and are often burned or dumped. However, these liquid distillates contain bioactive compounds and could be collected to generate additional income.

In this study, four types of industrial hemp hurds were thermally processed and converted into liquid distillates by slow pyrolysis at different temperatures [5]. The team investigated the chemical composition of the distillates to identify possible valuable molecules or molecule groups. They believe this is the first time that large samples (kilograms) have been studied in this way. Previous studies have focused on small, lab-scale samples (grams) [4].

The authors processed the hurds using slow pyrolysis at relatively low process temperatures from room temperature up to the maximum operating temperature of 350 ̊C. They collected raw distillates at three stages of the slow pyrolysis process (drying, torrefaction, and pyrolysis).

Detailed Analysis of Samples
Various analytical techniques were employed to study the samples. These included Fourier transform infrared (FTIR) spectroscopy, one-dimensional (1D) and two-dimensional (2D) nuclear magnetic resonance (NMR) spectroscopy, liquid chromatography–high-resolution mass spectrometry (LC–HRMS), and two-dimensional gas chromatography-mass spectrometry (2D GC-MS). For example, FTIR spectroscopy was used to obtain information regarding functional groups of all the hemp hurd distillate fractions. All spectra were measured using Bruker’s Alpha FTIR spectrometer equipped with attenuated total reflection diamond, a sensitive 2 × 2 mm diamond crystal surface, and sample compartment RT-DLaTGS.

The team identified and measured some potentially valuable molecules for the first time. The analyses showed remarkable differences in the concentration of compounds in different distillates. The relevant compounds came from three different hemp hurd samples, especially from torrefaction and pyrolysis phase distillates condensed below 100 ̊C.

Acetic acid was the main component of all samples. Other interesting compounds included guaiacol and syringol derivatives such as 2,6- Dimethoxyphenol, guaiacol (2-Methoxyphenol), vanillin, and eugenol.
Most of these compounds are expensive to make because they appear in low concentrations in distillates, which means they must be separated and purified (although several modern scalable techniques are available). Such compounds could be used as purified products for nutritional, pharmaceutical, and agricultural purposes. Vanillin and eugenol, for example, are used as ingredients by the functional food and pharmaceutical sectors.
The authors estimate that one ton of hurds (€200 at current prices) would produce about 300 kg biochar (worth around €400 at current prices). It would also produce about 40 kg of acetic acid, the main compound in the distillates, worth around €100 as a bulk product. One ton of hurds would generate around 1.3 kg of 1-hydroxybutan-2-one, the most expensive of the minor distillate compounds. In principle, this could be purified to higher than 95% purity and sold for €1300–6500. 1-hydroxybutan-2-one is often used as a flavor or fragrance agent.

Conclusion
This study provides useful baseline data for chemical profiling of wood distillates, especially hemp hurd distillates. It also shows clear potential to generate high-value products from hemp hurds by utilizing slow pyrolysis to generate biochar and distillates that contain potentially useful ingredients. The whole process can be optimized to generate the most valuable products, varying factors such as temperature, heating rates, and residence times. Further processing of distillates would involve separation and purification procedures such as short path distillation and centrifugal partition chromatography. The researchers recommend further research to evaluate the economic potential in detail, for example, by considering the purification process costs and the market value and volume of high-value chemicals, and the business potential in general.
Bruker offers the broadest range of analytical techniques used in the emerging global Cannabis Industry already today. The portfolio includes benchtop and floor-standing NMR, optical methods like FTIR and Raman spectroscopy and mass spectrometry. This makes Bruker the only end-to-end solution provider with applications tagging into every stage of the Cannabis value chain. We enable our customers to generate new revenue streams and reduce waste.

Bruker does not support, encourage, or intend that its products or services be used in connection with any illegal use, cultivation or trade of cannabis or cannabis products.  Bruker products are intended to be used only in compliance with all applicable laws in a manner that promotes public safety and in connection with any lawful and approved scientific or medical research activities.

References
[1] Cherney, J.H. et al, (2016). Industrial Hemp in North America: Production, Politics and Potential. Agronomy.
https://www.mdpi.com/2073-4395/6/4/58
[2] Carus, M. and Sarmento, L., (2016) The European Hemp Industry: Cultivation, processing and applications for fibres, shivs, seeds and flowers. EIHA.
https://eiha.org/media/2016/05/16-05-17-European-Hemp-Industry-2013.pdf
[3] Amini, E. et al, (2019) Characterization of pyrolysis products from slow pyrolysis of live and dead vegetation native to the southern United States. Fuel.
https://www.sciencedirect.com/science/article/abs/pii/S0016236118314832
[4] Branca, C. et al, (2017) Experimental analysis about the exploitation of industrial hemp (Cannabis sativa) in pyrolysis. Fuel Processing Technology.
https://www.sciencedirect.com/science/article/pii/S0378382016310372
[5] Salami, A. et al, (2020) Complementary chemical characterization of distillates obtained from industrial hemp hurds by thermal processing. Industrial Crops and Products.
https://www.sciencedirect.com/science/article/abs/pii/S0926669020306774?via%3Dihub

Posted on Leave a comment

Is Hemp Really Stronger Than Steel? How?

Is Hemp Really Stronger Than Steel? How?

Let us think of the comparative strength of a metal known to be strong and a hemp plant fiber. Which do you think would be stronger? You’re tempted to say hemp. But is hemp stronger than steel? The comparative strength of steel and a plant fiber, let us say. What would be your common-sense response?
We actually asked this question randomly to a number of people of different age-groups. We simply wanted to check whether our intuitive response matches with theirs. It did. Almost everyone said – steel would be stronger. Only two people refused to answer. They believed there was a trick in the question somewhere.
The common-sense response would be correct in most cases. With one exception: hemp fiber. Fibers from this non-narcotic variety of Cannabis Sativa can be stronger than steel, experts have demonstrated.

By Way of Clarification

You have read right: hemp does belong to the same plant species as the drug cannabis or marijuana: Cannabis Sativa. However, hemp is not a drug. It cannot give you a high. Hemp does not have more than 0.3% tetrahydrocannabinol (THC) to do that.
THC is the substance with psychoactive qualities, present in the narcotic cannabis at a concentration level of 7.5-10% or more. Hence the mind-altering capacity of cannabis or marijuana. Hemp is clean.

Is hemp stronger than steel? The Truth – Revealed

Strength in scientific terms gets calculated in two different ways mainly. Hemp fibers have been studied from both of these ways of measuring strength. Counter-intuitive though it seems, hemp fiber has proven to be stronger than steel from both these angles. Below, we describe in detail how that is possible.

Tensile and Compressive Strength

Tensile strength is the ability to withstand tension. Compressive strength is the ability to endure compression. In other words, how much tension or tautness can something take before it gets permanently deformed? That is the tensile strength of that material.
For example, how much pulling can a rope endure before it tears? That is the rope’s tensile strength. To tear is to get permanently deformed. It could also be measured in terms of weight endurance. For instance, how much weight can a tree branch take before it cracks and breaks?
The weight at which the tree branch cracks and breaks is beyond its tensile strength threshold. The maximum weight it can endure is indicative of its ultimate tensile strength.
Similarly, how much compression can something take before it loses its capacity to mend itself? That is compressive strength.
Think of spring in this context. Normally, a spring will bounce back to its own shape as soon as you remove the pressure you are applying to it. However, it is also possible to keep squeezing a spring until it is no longer able to regain its own shape.
The degree of pressing a spring can take without losing its shape permanently is its compressive strength. In simple terms, the pressure something can withstand before cracking and breaking or tearing is its tensile strength. The force applied takes the form of pulling at both ends.
It can also take the form of piling on increasing amounts of weight on something. till it cracks and breaks. The amount of pressure something can endure without bending and losing its shape permanently is its compressive strength. The force applied in this case takes the form of pushing from both ends.

The Tensile Strength of Steel

Metallurgy, the science of metals, mentions steel to be one of the strongest metals. Strictly speaking, steel is not metal as it is an alloy of iron and other elements, among which carbon is a non-metal. That does not make a difference to the strength of steel, though.
There are different varieties of steel with varying tensile strengths. The weakest form of steel is plain carbon steel with a tensile strength of up to 150 MPa. The strongest variety is ausformed steel with 3000 MPa of tensile strength.

The Tensile Strength of Hemp Fibers

In an article published in 2003 in the Materials Research Innovations, the authors report extensively on the tensile strength of hemp fibers of different diameters. The general rule in the case of synthetic fibers is that a reduction in the diameter of the fiber also decreases the faults.
That implies a lesser diameter of synthetic fibers gives it higher tensile strength. Authors Prasad and Sain demonstrate in their article that this same principle is applicable to hemp fibers also. Hemp fibers with a diameter of 4 μm (micrometer) have a tensile strength of 4200 MPa.
In contrast, the tensile strength of hemp fibers of 66 μm is 250 MPa only. The extensive experiments by Prasad and Sain demonstrate that the thickest hemp fiber with the least tensile strength (250 MPa) has more tensile strength than the variety of steel with the least tensile strength (150 MPa).
Their experiments also demonstrate that the thinnest fibers of hemp with the maximum tensile strength (4200 MPa) is stronger than the steel variety with the highest tensile strength (3000 MPa). The range of tensile strength possessed by hemp fibers of different diameters is, thus, more than the tensile strength range of different varieties of steel.

Is hemp stronger than steel? A Simpler Explanation of the Answer

It is possible to explain the above feature of strength in simpler terms, without using the scientific jargon ‘tensile strength’. It will take a lot more pressure to crack or break composite materials made of hemp fibers than the amount of pressure needed to crack or break things made of steel.
This is true across different varieties of steel and varying diameters of hemp fibers. The weakest hemp fiber needs more pressure to crack and break than the weakest variety of steel. The strongest variety of steel needs less pressure to crack and break than the strongest variety of hemp fiber.
Hemp has the capacity to endure double the weight of steel before it cracks and breaks. That is how much stronger hemp is than steel.

The Compressive Strengths of Hemp and Steel

The ability of hemp not to bend to compression is nearly six times that of steel, experts say. From the angle of compressive strength, therefore, hemp is six times more bend-resistant than steel.
That makes hemp stronger than steel from both aspects of strength measurement. The next time someone asks you – Is hemp stronger than steel? You can confidently answer – hemp, and then educate everyone on ‘how’ it’s stronger.

Strength Measurement in Applications

On June 19, 2017, CNBC reported on an episode from the “Jay Leno’s Garage’ show, where Leno drove a sportscar named Renew. Former Dell executive Bruce Dietzen got this sportscar specially made for himself out of 100 pounds of hemp fibers.
Both Dietzen and Leno punched the car with considerable force several times. Their hands were hurt, but there was no dent in the car, unlike a car with a steel body. According to the owner, his hemp car is 10 times stronger than any car made of steel.

A 2018 article in Material Science recommends the use of hemp cables instead of cables made of harmonic steel for roofs with hyperbolic paraboloid cable nets. According to the author, this substitution would be both cost-effective and environment-friendly without involving any compromise in the strength aspect.
News 18 reported on August 26, 2019, that the Canadian Hempheath Group has devised the world’s first aircraft made entirely from hemp. This four-seater plane has everything, from the wings to the body, the seats, and pillows are made from hemp.
The company intends to run it on hemp biofuel also. Hemp’s superior ability to endure more weight than steel and its considerably higher bendability makes it 10 times stronger than steel, says the founder of the company.

Sources:

Hemp Cables, a Sustainable Alternative to Harmonic Steel for Cable Nets

Tensile Strength of Steel And Other Metals

A Study in Physical and Mechanical Properties of Hemp Fibres

Vishal Vivek  
December 3, 2019

https://hempfoundation.net/is-hemp-really-stronger-than-steel-how/#:~:text=Hemp%20fibers%20with%20a%20diameter,%CE%BCm%20is%20250%20MPa%20only

Posted on Leave a comment

New Wind Generation Technology Produces 6 Times More Energy

A wind power company, SheerWind, from Minnesota USA has announced its new Invelox wind power generation technology. The company says its turbine could generate six times more energy than the amount produced by traditional turbines mounted on towers.via: News Direct

source/image: News Direct

Invelox does not rely on high wind speeds. It captures wind at any speed, even as low as 2 miles per hour.The result is the design is capable of producing 600% more energy due to the low wind speed.

Posted on Leave a comment

Industrial hemp is an ancient crop that’s making its way into modern construction. 

People have grown hemp for millennia to make products like clothes, rope, fuel, medicine, and paper. But since the 1930s, it’s been prohibitively expensive or illegal to produce hemp in the U.S. and many other nations, mainly because the plant is closely related to marijuana. Unlike marijuana, however, hemp doesn’t get you high because it contains very low levels of the psychoactive chemical THC.

“Industrial hemp is a member of the family Cannabis sativa,” Matthew Mead, founder and CEO of the natural building materials company Hempitecture, told Freethink. “It’s kind of like the sober cousin of THC-producing varieties of hemp. Today, the definition of industrial hemp is that it has 0.3% THC or less.”

Industrial hemp is an ancient crop that’s making its way into modern construction. 

Hempitecture is one of a growing number of companies using hemp for its durability, versatility, and sustainability as a building material. The Idaho-based startup is focusing on insulation. Hemp-based insulation products are as effective at insulating buildings as common insulators like fiberglass, and they’re significantly better for the environment. 

Hemp is a natural product that doesn’t contain toxic chemicals as some synthetic insulation does. What’s more, growing the crop removes carbon from the atmosphere. In fact, hemp is about twice as effective at sequestering carbon as trees. 

Despite its sustainability and wide array of uses, the federal government had long chosen not to differentiate hemp from marijuana. The 2018 Farm Bill changed that by legalizing hemp production on the federal level. Although hemp remains illegal in many states, the industry has seen sudden and chaotic growth in recent years, and is projected to grow from roughly $5 billion in 2019 to $36 billion by 2026.

“I think we’re actually coming back full circle to our ancient roots of building with the Earth,” Mead told Freethink.

The ancient roots of hemp 

Hemp was likely one of the first agricultural crops. Its history in human culture stretches back at least 10,000 years to modern-day China and Taiwan, where archaeologists discovered pottery that had cords made from hemp. Historical texts and other archaeological discoveries suggest the Chinese grew hemp for a wide variety of purposes, like making clothes, medicine, and paper. In fact, the world’s oldest known book — a Buddhist text called the Diamond Sūtra — was printed on hemp. 

Evidence of ancient hemp use has been found across many parts of the planet.

In India, legend holds that the Buddha ate a single hemp seed every day during his ascetic period. In Japan, brides used to wear hemp strands for symbolic purposes during weddings. And in Rome, engineers added hemp fibers to mortar to make stronger bridge abutments. 

In 1606, hemp made its way to North America. The European colonists at Jamestown grew the crop for sails, clothes, and rope, while later settlers heading west used hempen canvas to cover their wagons. Hemp became such a valuable crop during the Colonial Era that the British government even mandated farmers to grow it. Founding Fathers like Thomas Jefferson and George Washington grew hemp on their estates; records indicate that Washington grew it on all five of his Mount Vernon farms. But despite hemp’s agricultural importance in early America, cotton eventually became the fiber crop of choice, mainly because it’s easier to harvest than hemp. 

American hemp production slowed dramatically in the 20th century when the U.S. government passed the Marihuana Tax Act of 1937, which taxed the sale of any form of cannabis. Some have argued that powerful actors like William Randolph Hearst and the Du Pont family, both of whom had economic interests in alternative fibers, aimed to kill off the hemp industry by having the legislation passed, but there’s no hard evidence of a conspiracy. 

During World War II, the U.S. government lifted the cannabis ban and encouraged farmers to grow the crop so the military could produce things like parachute webbing, rope, and thread for shoes. A 1942 government film called “Hemp for Victory” extolled the crop’s history and utility: “For the sailor, no less than the hangman, hemp was indispensable […] American hemp must meet the needs of our Army and Navy, as well as our industries.” Yet after the Allied Victory, the government reinstated the ban on hemp production.

The Marihuana Tax Act of 1937 was overturned by the Supreme Court in the 1969 case Timothy Leary v. United States  yes, that Timothy Leary  and repealed by Congress shortly afterward as part of the Comprehensive Drug Abuse Prevention and Control Act of 1970, which designated Hemp a Schedule I substance alongside its intoxicating relatives. 

It was only with the 2018 Farm Bill that hemp was taken off the list of prohibited substances and legalized at the federal level, though several states had taken steps to make industrial hemp production viable in the years leading up to that. 

As Freethink reported with marijuana, legalization has helped to renew interest in the use of hemp in a number of areas, including as a building material. Today, a number of industrial hemp companies, including  Hempitecture, are looking to the stuff as an alternative to currently used materials. 

To that end, Hempitecture has created a new form of insulation, called hemp wool, made of processed industrial hemp, a binder, and a fire retardant.

It works just as well as synthetic insulation in terms of heat regulation, fire resistance, and preventing the growth of mold. Beyond that, it doesn’t require petrochemicals or other toxic substances to produce and instead works as a carbon sink.

Mead further explained the practical benefits of hemp wool to Freethink:

“What we’ve found is that hemp wool is just better for everybody that comes in contact with it, whether it’s the general contractor who’s on site everyday, the laborers or the installation technicians that are installing it, to the homeowner,” Mead said. “Everybody is happier when they’re around hemp wool because they’re not itchy, they’re not worried about toxic off-gassing or abrasiveness on their skin.”

The insulation works and is currently being used in many building projects. The next challenge is getting it adopted by more people who are currently buying materials that require a great deal of carbon to produce. To do that, Hempitecture is going to have to scale up production. 

Hemp in every home?

Though it’s ramping up, American hemp production is still limited. Because of the cost of importing it, hemp wool is still more expensive than other insulation materials in the U.S. 

Mead hopes to begin domestic production of hemp wool by the middle of 2022, at which point the product may become cost competitive with its alternatives. The price may then continue to fall if industrial hemp production continues to increase.

Growing more hemp for use in building materials and manufacturing fewer petrochemical-derived synthetic insulators could go a long way toward cleaning up the environment. Perhaps one day, the widespread use of hemp-based building materials will make construction cheaper, safer, and more environmentally friendly.

By Stephen Johnson October 19, 2021

Posted on Leave a comment

Hemp-Based Fiberboard Moves Closer to Mass Market

 

That new-construction-smell might actually be a slurry of chemicals being released from the particle board used in subfloors and walls. The air might also be heavy with guilt about using valuable and slow-growing trees in your building projects. 

Sometimes called chip or fiber board, composite building materials typically consist of overlapping and interlocking chipped wood that is held together by a resin binder. 

But a new building material might help clear the air—both figuratively and literally—by using renewable hemp instead of trees for particle board. 

 

Hemp pioneer Lawrence Serbin, president and owner of Hemp Traders, has led the development of a new hemp-derived particle board. It’s called CannaBoard and it uses hemp fibers and a non-toxic, formaldehyde-free resin as a binder. It can be used anywhere you use particle board, from furniture to subfloors, the company says.

CannaBoard was available in small quantities, and slated for a large production run in 2020 when COVID-19 hit, Serbin said. The pandemic broke down the supply chain—the original production factory in Idaho had to scale down their work during the lockdown. 

“When COVID hit, they sort of circled their wagons and didn’t want to concentrate on anything but their core business to stay alive,” said Serbin. 

 

But with interest in local, sustainable, non-toxic, hemp fiberboard increasing in the United States, Serbin is pushing forward on his plans—he’s looking for another factory to tackle the production. He is confident that consumers will see that hemp particle board is a strong, renewable, and American-made building product that can compete with any engineered wood board. 

Hemp Products are Old Hat

Serbin is no stranger to industrial hemp. In 1993, he founded Hemp Traders, one of the first hemp companies in the United States. 

“Almost from day one, I loved the idea of hemp being able to replace wood or trees for lumber,” he told HempBuild Magazine. 

Serbin has worked with hemp for nearly three decades. In 2018, he opened CannaGrove — a 

company that creates a number of building products, including CannaBoard. All the hemp used by CannaGrove is grown in the US, and the board is American-made. CannaBoard mimics its wood-derived cousin, but instead uses the fiber of the hemp stalk instead of chipped-tree wood.

Environmentally Sound, Exceptional Properties

Hemp is a fast-growing annual plant, which makes it perfect for creating building materials, noted Serbin. 

“It’s going to be better for the environment rather than having to go out and harvest a tree that has to grow for 30 years or more—easily more,” said Serbin. Replacing this valuable resource with hemp keeps the forests intact.

Beyond the renewable hemp fibers, the binders used in CannaBoard do not contain any formaldehyde. On their website, Hemp Traders stated that traditional binders used in engineered wood products like particle board, contain formaldehyde. When used inside a home, that chemical, a carcinogen for humans, is released into the air. 

CannaBoard instead uses organic-based isocyanate as a binder. Currently, the board comes in thicknesses of ½” to ¾” and can be used in place of medium density fiberboard (or MDF). Serbin noted that it’s possible to scale the thicknesses from ¼” to 1 ½” thick. It is a smart option for construction uses like subflooring or molding, or for building cabinets, shelving, or other simple wood structures, the website says.

Hemp fiber board isn’t just environmentally-friendly, it’s also robust and diverse. 

CannaBoard hemp fiberboard can be used for a variety of building projects, including subfloors, or laundry room shelving, Photo courtesy of L. Serbin
CannaBoard hemp fiberboard can be used for a variety of building projects, including subfloors, or laundry room shelving, Photo courtesy of L. Serbin

“If we made a [board] with hemp at a particular density, and we made a wood particle board in the same density, the hemp would be stronger,” said Serbin, adding that the hemp product would also be lighter in weight.

“Hemp is also very absorbent, so it allows us to very easily add things to it… like water repellent or a fire retardant,” he explained. While wood particle board can also be treated, the hemp absorbs additives much better, Serbin said. 

 Is Hempboard Cost-effective?

As of July 2021, CannaBoard was priced between $45-60 per board (depending on thickness and bulk amount purchased). In comparison, a home improvement store priced MDF between $33-44 a board. 

“Ultimately I'm going to be able to produce hemp particle board cheaper than wooden board,” Serbin said. He added that before the recent spike in lumber prices, CannaBoard was close to the cost of wood, but now he expects the price of hemp board will beat that of wood. 

While he hunts down a new factory for producing hemp fiberboard, Serbin has switched gears to working with American farms growing hemp for industry.

“We're growing hemp for the first time this year in California and have set up a factory in the Central Valley for growing and processing,” he said. “The good thing about that is that I’m going to create a situation where anyone who does want to do any type of building material will have a reliable supply of fiber at a low price.”

Lawrence Serbin carries some of the 20-foot-tall industrial hemp being grown in California fields. Hemp Traders are working with a factory located in the Central Valley to grow and process the hemp into fibers for use in industry applications. Photo courtesy of  L. Serbin
Lawrence Serbin carries some of the 20-foot-tall industrial hemp being grown in California fields. Hemp Traders are working with a factory located in the Central Valley to grow and process the hemp into fibers for use in industry applications. Photo courtesy of L. Serbin

Michigan-based Sarah Derouin is a geologist and science writer and editor and contributor to the Big Picture Science radio show.